退火温度对HA/Ti-24Nb-4Zr复合材料组织与性能的影响

利用放电等离子烧结(SPS)技术制备了HA/Ti-24Nb-4Zr生物复合材料,研究了不同退火温度对复合材料显微组织和力学性能(抗压强度、屈服强度、屈强比、压缩弹性模量)的影响。结果表明,烧结态复合材料主要由β-Ti相、少量初生α-Ti相及HA相组成;随着退火温度的升高,复合材料基体中β-Ti相含量增多且晶粒逐渐长大,针状次生α-Ti相在晶界处和晶内不断析出,HA相结构和含量变化不大;与烧结态相比,不同退火温度处理后的复合材料强度和弹性模量先略微上升后下降,而塑韧性呈不断提高趋势;复合材料在850 ℃退火处理后,抗压强度、屈服强度、屈强比和压缩弹性模量值分别为1507 MPa、1270 MPa、0.84和42 GPa,塑韧性得到明显改善,作为生物医用植入材料具有潜在的应用前景。     

公民水素养评价表征因素模型构建与分析

针对我国水资源紧缺、水生态损害、水环境污染等相关水问题,以提升全民爱水惜水节水护水的意识和能力为目标,从水素养概念出发,通过扎根理论质性研究方法对公民水素养评价的表征因素进行筛选和提炼,最终得出包含水知识、水态度、水行为为主范畴的10个表征因素并运用解释结构模型(ISM)深入剖析各因素之间的内在联系。在此基础上建立了3级多层次递阶结构模型,进一步精确描述系统各要素两两之间的直接关系。结果表明:公民水素养评价的表征因素自上而下形成了表象层、中间层和根源层等3个层级,可直观、清晰地反映表征因素之间的递阶、层级关系;水态度在各表征因素中具有调节作用以及各表征因素之间存在内在逻辑关系。研究成果为提高公民水素养水平提供一定的科学依据和政策参考。     

基于SAOR的Massive MIMO系统信号检测算法

大规模多输入多输出(Massive multiple input multiple output, Massive MIMO)系统采用最小均方误差(Minimum mean square error, MMSE)接收检测方法时存在矩阵求逆复杂度高的问题，已有较多降低复杂度的研究。在降低检测算法复杂度的同时，如何提高算法收敛速度和检测性能一直是人们关注的焦点。本文将对称加速超松弛(Symmetric accelerated over-relaxation， SAOR)迭代算法应用于Massive MIMO系统信号检测中，避免了复杂的矩阵求逆计算，实现了复杂度较最小均方误差算法降低了一个数量级。仿真结果表明，基于SAOR的检测方法通过较少的迭代次数就能逼近最小均方误差（Minimum mean square error, MMSE）算法的检测性能，为Massive MIMO系统中接收信号的快速检测提供了较好的实现方法。     

基于LBSN动态异构网络的时间感知兴趣点推荐

随着基于位置社交网络(Location-Based Social Network,LBSN)的快速发展,兴趣点(Point-Of-Interest,POI)推荐可以帮助人们发现有趣的并吸引人的位置。针对签到数据的稀疏性和用户兴趣的动态性等挑战性问题,提出了基于LBSN动态异构网络的时间感知兴趣点推荐算法。在LBSN异构网络模式中增加会话节点类型。通过动态元路径,在用户和兴趣点语义关系之间有效地融入时间信息、位置信息和社交信息等。设置了用户-兴趣点之间的动态元路径集,并提出了动态路径实例的偏好度计算方法。采用矩阵分解模型对不同动态偏好矩阵进行矩阵分解。根据不同动态元路径的用户特征矩阵和兴趣点特征矩阵,获取用户在目标时间访问兴趣点的推荐列表。实验结果表明,与其他兴趣点推荐方法相比,所提方法在兴趣点推荐精确度上取得了较好的推荐结果,具有良好的应用前景。     

An iterative approach for the discrete‐time dynamic control of Markov jump linear systems with partial information

The , and mixed dynamic output feedback control of Markov jump linear systems in a partial observation context is studied through an iterative approach. By partial information, we mean that neither the state variable x(k) nor the Markov chain θ(k) are available to the controller. Instead, we assume that the controller relies only on an output y(k) and a measured variable coming from a detector that provides the only information of the Markov chain θ(k). To solve the problem, we resort to an iterative method that starts with a state‐feedback controller and solves at each iteration a linear matrix inequality optimization problem. It is shown that this iterative algorithm yields to a nonincreasing sequence of upper bound costs so that it converges to a minimum value. The effectiveness of the iterative procedure is illustrated by means of two examples in which the conservatism between the upper bounds and actual costs is significantly reduced.     

Asynchronous control for two‐dimensional hidden Markovian jump systems with partly known mode observation conditional probabilities

This study focuses on the asynchronous control problem for two‐dimensional discrete‐time hidden Markovian jump systems where the mode observation conditional probability matrix is partly known. Considering the original system modes are invisible, the observed modes emitted from an observer serve as an alternative for stability analysis and controller design where a mode observation conditional probability matrix is constructed to characterize the emission between system modes and observed modes. Specially, only partly known information of the mode observation conditional probability matrix is accessible. With the introduction of the free‐connection weighting matrices, the asymptotic mean square stability criterion is firstly derived based on Lyapunov method. This introduction provides a further degree of relaxation and less conservatism is therefore achieved. Secondly, we present synthesis conditions for asynchronous state feedback controller design given in terms of a set of interconnected linear matrix inequalities. Moreover, cluster concept based on the partitions of observed modes is adopted which helps to decrease the number of controllers and simplify the design complexity. A numerical example, regarding the cases with and without clustering of the observed modes, is presented to illustrate the effectiveness of the proposed method.     

Stability and stabilization for singularly perturbed systems with Markovian jumps

This article focuses on the stability and stabilization problems of singularly perturbed jump systems. Here, the singularly perturbed parameter (SPP) is also with Markov switching and satisfies any with positive bound predefined. First, stability conditions expressed ?_i‐free but involving its bound are developed by constructing an ?_i‐dependent Lyapunov function. Then, a method for state feedback stabilization controller depending on SPP is proposed, whose conditions are given in terms of linear matrix inequalities. Moreover, some special cases about deterministic SPP are considered too. Finally, two practical examples are used to demonstrate the effectiveness and superiorities of the proposed methods.     

基于改进型巴特勒矩阵的短波8元圆环阵列多波束技术研究

传统短波接收天线为单一的波束指向天线或全向天线。为提高接收天线增益,同时产生多个波束指向不同方向,提出利用巴特勒矩阵作为短波接收天线阵的无源波束形成网络。在传统8×8巴特勒矩阵结构的基础上,设计改进型8×8巴特勒矩阵。以均匀8元圆环阵列为天线模型,利用FEKO仿真分析了其天线特性。在3~11 MHz频段内,P2、P3、P6、P7四个端口分别在202.5°、292.5°、112.5°、22.5°方向上得到了方向性较强的单一波束,7 MHz时波束增益达到最大11.9 dBi,波瓣3 dB宽度平均为60°;在P1、P4、P5、P8端口产生相同的2个波瓣,7 MHz时其波束增益达到最大9.8 dBi,波瓣3 dB宽度平均为89°。由以上仿真分析得出,该改进型8×8巴特勒矩阵能够同时产生6个波束,波束覆盖8个方向,提高了波束的方向性,提高了天线增益。     

Incomplete analytic hierarchy process with minimum weighted ordinal violations

ABSTRACT

Incomplete pairwise comparison matrices offer a natural way of expressing preferences in decision-making processes. Although ordinal information is crucial, there is a bias in the literature: cardinal models dominate. Ordinal models usually yield nonunique solutions; therefore, an approach blending ordinal and cardinal information is needed. In this work, we consider two cascading problems: first, we compute ordinal preferences, maximizing an index that combines ordinal and cardinal information; then, we obtain a cardinal ranking by enforcing ordinal constraints. Notably, we provide a sufficient condition (that is likely to be satisfied in practical cases) for the first problem to admit a unique solution and we develop a provably polynomial-time algorithm to compute it. The effectiveness of the proposed method is analyzed and compared with respect to other approaches and criteria at the state of the art.     

Fabrication of Cu/graphite film/Cu sandwich composites with ultrahigh thermal conductivity for thermal management applications

Effective thermal management of electronic integrated devices with high powder density has become a serious issue, which requires materials with high thermal conductivity (TC). In order to solve the problem of weak bonding between graphite and Cu, a novel Cu/graphite film/Cu sandwich composite (Cu/GF/Cu composite) with ultrahigh TC was fabricated by electro-deposition. The micro-riveting structure was introduced to enhance the bonding strength between graphite film and deposited Cu layers by preparing a rectangular array of micro-holes on the graphite film before electro-deposition. TC and mechanical properties of the composites with different graphite volume fractions and current densities were investigated. The results showed that the TC enhancement generated by the micro-riveting structure for Cu/GF/Cu composites at low graphite content was more effective than that at high graphite content, and the strong texture orientation of deposited Cu resulted in high TC. Under the optimizing preparing condition, the highest in-plane TC reached 824.3 W·m⁻¹·K⁻¹, while the ultimate tensile strength of this composite was about four times higher than that of the graphite film.